アプリケーション
タイミング＆周波数
Loading
機能
すべて
検索基準に一致する回路
下の回路が、選択された検索基準に一致します
0.01% Voltage To Frequency Converter 13uA, 0kHz to 10kHz Voltage to Frequency Converter 1Hz to 100MHz Voltage to Frequency Converter Has 160dB Dynamic Range, Runs From 5V Supply 1Hz to 10kHz Voltage-to-Frequency Converter 1MHz Pulse Width Modulator 28V Power to Frequency Converter 5V Powered, Quartz-Stabilized 10kHz Voltage to Frequency Converter has 0.0015% Linearity and 8ppm/°C Temperature Coefficient 8 Second to 8.5 Minute Low Frequency Clock (Intervalometer for Time-Lapse Photography) Balanced Frequency Converter (Suitable for Frequencies up to 50kHz) Bipolar Input (AC) V/F Converter Clock Tunable, Filter Based Sine Wave Generator Consecutive Test Sequencer Crossover Gate—Break-Before-Make Interval Timer Delayed One Shot Exponential Voltage-to-Frequency Converter for Music Synthesizers Isolated PWM (5% to 95%) Controller Light to Frequency Converter Low Distortion, Crystal Stabilized Oscillator LTC6945による広帯域ポイント・トゥ・ポイント無線用ローカル発振器 パッシブ・ダウンコンバーティング・ミキサをドライブするLTC6946-2 Micropower 1MHz V/F Converter Motor Speed/Direction Control for Full H-Bridge (Locked Anti-Phase Drive) On-Time Programmable Pulsed Solenoid Driver Pulse Generator Has 0ns to 10ns Width, 520ps Transitions Pulse Staircase Ramp Generator Quadrature Sine Wave Oscillator. Voltage Controlled Frequency Range from 2Hz to 18kHz with 1VP-P Constant Output Amplitude Rail-to-Rail 1MHz Pulse Width Modulator Ratiometric Sensor to Pulse Width, Non-Inverting Response Simple Diode Temperature Sensor With Frequency Output 超低歪みの可変正弦波発振器 Temperature to Frequency Converter Temperature To Frequency Converter Temperature-to-Frequency Converter Ultrapure 1kHz Sine Wave Generator Voltage Controlled Oscillator with 16:1 Frequency Range
0.01% Voltage To Frequency Converter
The LTC6943 is a monolithic, charge-balanced, dual switched capacitor instrumentation building block. A pair of switches alternately connects an external capacitor to an input voltage and then connects the charged capacitor across an output port. The internal switches have a break-before-make action. An internal clock is provided and its frequency can be adjusted with an external capacitor. The LTC6943 can also be driven with an external CMOS clock.
