アプリケーション
エネルギー蓄積
Loading
機能
すべて
検索基準に一致する回路
下の回路が、選択された検索基準に一致します
12V Input to 5V Outputs High Peak-Power & Backup Supply using Two Supercapacitors with Input Voltage Monitoring 12V電源のライドスルー回路 12V Power Ride-Through Application Using Six Supercapacitors in Series and Voltage Supervisor 12V to 5V/3.3V High Peak Power Supply using Two Supercapacitors 2.65V at 1.2A Output Super Cap Charging Circuit from 7.5V to 36V Input 20A Super Capacitor Charger with 5V Regulated Output from 10V to 36V Input 入力電流制限を備えた、28V入力、0V～28V出力のSEPICスーパーキャパシタ・チャージャ 3 × AA Alkaline to High Peak Power 3.3V at 2A Using Two Supercapacitors 3.3V at 1.5A from 5V Peak-Power & Back-up Supply using Two Supercapacitors 3.3V to 5.5V input (500mA max) charging 4.4mF super cap (3.3V at 800mA) and providing 1.8V at 400mA 直列に接続された2個の2.5Vスーパーキャパシタを充電する36VIN、5.6Aチャージャ 5V at 6mA for 9.6s Supercapacitor Backup Supply 250mA負荷でVIN = 2Vまでスーパーキャパシタで動作する5Vバックアップ電源 5V Power Ride-Through Application Using Two Series Connected 10F, 2.7V Supercapacitors Charged to 4.8V That Can Hold Up 20W for 1.42 seconds スーパーキャパシタ・バックアップ電源の昇降圧コンバータ Complete Energy Utilization Maximizes Run Time of Supercap Ride-Through Application デュアル・バッテリによる負荷シェアリングとACアダプタへの自動切り替え Dual Super Cap Charging Circuit from 12V with Balance Voltage Charging Control Circuit Embedded Automotive (6V to 36V Input) to 5V/3.3V/1.8V/1.2V Output Peak-Power Controller using Two Supercapacitors High Current USB Battery and Supercapacitors Charger with Power Path Control Last-Gasp 5V Output from 12V to 15V Supply Using a Supercapacitor Lead-Acid Low-Battery Detector with System Shutdown リチウムイオン・バッテリのバックアップ電源 Li-Ion High Peak Power Battery Buffer Using Two Supercapacitors スーパーキャパシタを使った電源バックアップ・システム スーパーキャパシタとオプションのキープアライブ・セルを使った電源バックアップ Redundant USB & 3xAA High Peak Power Battery Supplies using Two Supercapacitors 飽和した標準セル・アンプ Single Supercap Charger from 3.3V Input to 2.5V Output Single Supercapacitor Charger from 1.8V to 5.5V Input to 5V Output (1000mA Max Input Current) MPPT 太陽光 SCAP チャージャ Stacked Supercap Charger from 2.5V to 5V Input to 4.5V Output Stacked Supercapacitor Charger from 1.8V to 5.5V Input to 5V Output (1000mA Max Input Current) SuperCap Backup Power Supercap Charger Plus a 5V at 4A DC/DC Buck Converter from 5.5V to 30V Input Supercap Powered Backup Supply エネルギー捕集方式を使って稼動時間を最大化するスーパーキャパシタ・ベースの停電時運転継続回路 データ・バックアップのためのスーパーキャパシタによるエネルギー貯蔵システム Two-farad, 5V SuperCap charger from a 3.3V input USB to High Peak Power 3.3V Supply Using Two Supercapacitors USB-GSM application with 5V USB input (500mA max) charging a 4.4mF super cap (3.4V at 800mA) and providing 1.8V at 400mA
12V Input to 5V Outputs High Peak-Power & Backup Supply using Two Supercapacitors with Input Voltage Monitoring
The LTC4425 is a constant-current/constant-voltage linear charger designed to charge a 2-cell supercap stack from either a Li-Ion/Polymer battery, a USB port, or a 2.7V to 5.5V current-limited supply. The part operates as an ideal diode with an extremely low 50mΩ on-resistance making it suitable for high peak-power/low average power applications. The LTC4425 charges the output capacitors to an externally programmed output voltage in LDO mode at a constant charge current, or to VIN in normal mode with a smart charge current profile to limit the inrush current until the VIN to VOUT differential is less than 250mV. In addition the LTC4425 can be set to clamp the output voltage to 4.9V or 5.4V.
